Half Reverse Cuban Eight Model pulls up and executes one-eighth (1/8) inside loop to 45 degrees, hesitates, does one-half (1/2) roll, hesitates, then performs five-eights (5/8) inside loop back to level flight in the opposite direction as entry. Downgrades: Loop segments not round with the same size and radius. Model not at 45 degrees before and after half roll. Changes in heading in loop segments or after half roll. Half roll not centered in 45 degree line. No hesitations before or after half roll.
Before we start dissecting the maneuvers, a word from your friendly webmaster about aligning your aircraft. It is vitally important that you do everything in your power to ensure that your plane is set up to perform the next maneuver BEFORE you begin its execution. That includes all of the following:
 Wings perfectly LEVEL Flight path parallel to the runway Altitude constant
I cannot emphasize strongly enough how important these things are to the Novice class flier. They WILL make the difference between scoring well and scoring badly.
Half Reverse Cuban Eight: Model pulls up and executes one-eighth (1/8) inside loop to 45 degrees, hesitates, does one-half (1/2) roll, hesitates, then performs five-eights (5/8) inside loop back to level flight in the opposite direction as entry.
 Read that description carefully. Here's how it's supposed to be done. At the completion of Straight Flight Out, up elevator is smoothly added to make the plane fly a constant radius 1/8th inside loop to a 45 degree climb. Fly a straight line in a 45 degree climb. Execute a one-half roll to inverted flight. You will need to add down elevator at the completion of the roll to maintain the 45 degree up line Fly a straight line (inverted). This line is still on the same 45 degree up line and must be the same length as the line immediately before the roll. Execute a five-eights (5/8) inside loop to level upright flight. Loop must be of constant radius, and radius must be the same 1/8th loop at beginning of maneuver. Exit altitude must be the same as entry altitude.
 Now for the downgrades:   Loop segments not round with the same size and radius. Both loop segments (1/8th and 5/8ths) must be of equal radius and must be ROUND! Model not at 45 degrees before and after half roll. Model must climb at 45 degrees. If the climb appears to be 45 degrees to the pilot, it's too shallow! That's because you're looking at it at an oblique angle, not straight on. If it is a true 45 degrees, it will appear more like 55-60 degrees from the pilot's perspective. Changes in heading in loop segments or after half roll. Model must remain parallel with the runway throughout the entire 3-maneuver set. Half roll not centered in 45 degree line. The two straight lines must be of equal length for the roll to be centered. No hesitations before or after half roll. If you skip either straight line segment (before or after the roll), deduct TWO points!